The rose is made of plastic suede. The flower is 6 cm tall and 11 cm in diameter.
For work we take materials: - sheet of paper. - plastic suede yellow and green. - scissors. - thin wire. - bezel. - a set of acrylic paint. - a little foam. - foil food.- glue gun. - a few beads for decoration. - a toothpick. - a lighter. - a plastic sheet for forcing an invoice. weave four different sizes, sepal, and leaves. We take, from a paper we cut out templates of preparations. We need squares with sides of 4 cm, 5 and 5.5 cm, also 6 cm, then we cut them in the form of droplets. In two large sizes, the upper edge will be with a wave. Next you will need a sheet in the shape of a boat, measuring 4.5 x 2.5 cm and 8 x 3 cm.
And by templates cut out of yellow suede two small sizes of 10 pieces.Medium petals 7 pieces, and large need only 5 blanks. And from the green suede will need smaller leaves 6 pieces and 5 parts larger .. 16/1537-master-klass-obodka-iz-foamirana.jpg "alt =" Master class of foamiran bezel "title =" Master class of foamiran bezel ">
Prepare the bezel. If it is without decoration, then it should be pasted over with tape.
And take the paint of green and red colors. We will paint with a piece of foam rubber.
Let's start with the biggest ones, and they should pass a foam with paint on the edge of the petals on both sides. Then additionally apply a layer in the middle of the blanks and also on both sides. Then we continue painting the blanks only along the upper edge.
When the petals are dry, we start processing with a cigarette lighter. Let's start with the smallest size blanks. We make the middle of the petal warm so that it can change shape. Therefore, immediately with our thumbs we make a depression in the middle of the petal.Then you should make a bend from two sides along the edge of the blanks. We bring fire from the left and the right of the wide part of the petal. The edge makes itself a beautiful little bend. In this way, we change the shape of two small sizes of blanks.
For medium petals, the recess is larger, and two folds on the edge of the blanks are not affected middle part.
But on large petals you need to do everything as everyone would add warm the middle of the upper edge and make an additional curl. It should be noted that the red side of the blank will be the face of the petal.
Here. Now all the petals are ready.
Next, go to the green blanks. On large leaves we apply green paint on the edge of the part on both sides,rubbing to the middle.
Next, we also apply red color.
Then from the top edge to the middle of the blank we make 3 cuts. We fold two sheets together and twist the split part with our fingers.
Go to the small leaves. We warm it up with a lighter and quickly apply it to the mold to imprint the veins on the leaves. You can do this with a toothpick, just draw such contours.
Then we paint such blanks with green and red paint on both sides.
Then the leaves should be cut correctly with a scissors to match the middle vein in the middle of the workpiece.And additionally we make teeth on the edge on the leaves.
All that remains is to glue the resulting parts onto a wire wrapped in green paper. On the front side of the sheet in the lower corner we have the edge of the wire, we press well.
Now we turn to the assembly of the rose itself. Making the base of the foil on the wire. Immediately stick the green paper at the base.
Let's start the assembly with small petals. The first 3 blanks are glued tightly to the base, completely covering the entire foil from the top.
Place the remaining 6 petals in a circle, applying glue to the middle details. We apply with the approach of one blank to another.
We paste another 10 petals in two rows of 5 parts in the same way in a circle.On the workpieces themselves, we glue only a narrow bottom with glue.
Medium-sized petals are positioned with one piece on the second. There will be 7 blanks in the row.
And we glue the biggest petals around the circle.
Now turn over eat the resulting flower up with wire and glue 5 large green blanks. It turns out on the rose sepal.
Leave the wire no longer than 4 cm.
To assemble the bezel should be prepared. The bezel itself, if necessary, then paste over it with a thin ribbon. On the rose, at will attach a decoration of fishing line with beads or balls on the wire.Green leaves to collect in bundles of 3 pieces and fasten together 1 cm, and leave the wire another 2 cm longer.
Getting Started to build. From the middle of the rim we fall back down 6 cm and fasten a bundle of leaves with a downward inclination behind the free edge of the wire. Then glue a strip of suede around the rim and the stem, closing the junction.
Fix the second leaves in the opposite direction from the first. The very rose is screwed in the middle of the leaves. On the seamy side, we close everything neatly.
Rim with rose ready.
Good luck to all!
How to meet a girl on the street, in contact, phrases for datingTartarus SauceWhat dishes are suitable for induction cookersThe spectacular decoration of a small country houseLamp - CarryingTropical style decorations for those who want a vacation